Box-Stock Brushless LMP Rules

1. JKC95 Aeolos Brushless Chassis ONLY
   1. Must use full-size oilites in the stock location, no grinding oilite holes.
      1. Any 3/16” OD Oilite may be used
   2. Must use JKU77 Enterprise II Guide Flag
      1. Guide Flag may be sanded, and guide post may be cut off.
      2. Any guide nut may be used
      3. Any braid may be used
   3. Must use the stock J-Bars that come in the chassis
      1. J-Bars may be replaced, but the thickness must be equal to the thickness of the original J-Bar
         1. Front J-Bar thickness: .039”
         2. Rear J-Bar thickness: .047”
      2. J-Bars may be bent in any way, but may not be modified. No cutting, grinding, or sanding allowed.
   4. Must use the stock Motor Bracket as it comes, no modifications of the motor bracket are allowed.
   5. Any motor screw may be used
2. PAR1304 4500Kv Motors ONLY
   1. Motors may not be tampered with whatsoever
   2. Motors will be marked in multiple locations to insure they are not tampered with. If a motor is purchased without these markings, notify us before installation.
   3. Motors may be turned in for repairs, in which we will repair the motor and re-mark it for you.
      1. DO NOT try to work on the motors yourselves. They can be very fragile, and the last thing we would want is for something to go wrong.
3. MAR13000 Remora ESC ONLY
   1. No different brand of Remora ESC may be used, as they all differ slightly.
   2. ESCs are not to be reprogrammed, if we believe that you have reprogrammed your ESC, we WILL check the settings and flash it back to stock.
      1. If your ESC settings are different to stock upon the check, you are liable to being disqualified from the event, with no exceptions. They don’t change on their own.
   3. We will be using the MAR13000A Remora Board Holder, to insure there is no risk of shorting on the chassis.
      1. We will be selling these two pieces together, to make it easier for everyone.
4. Gears and Tires
   1. We will be using JK 64p Pinions and Gears ONLY.
      1. Pinion: 9t 64p
         1. Pinion must be straight cut, no bevelled pinions.
      2. Gear: 35t 64p
         1. Gear must be straight cut, no bevelled gears.
   2. Tires: JK8700PPL/JK8701PPL
      1. Tires can be cut down
      2. The tires are SPEC, no other tire compound will be legal unless we say otherwise.
   3. Minimum height at the start of the race will be .032”, including the gear.
   4. Maximum width at the rear will be 83mm (3.268”)
5. Body
   1. Red Fox LMP Bodies with these part numbers:
      1. RFSC100C Audi R18
      2. RFSC101C Ferrari Concept
      3. RFSC40C Acura
      4. RFSC99C Peugeot 908
   2. This body list may be widened in the future to include more bodies of similar downforce levels
   3. Bodies must be fully painted with clear windows and have 3 visible numbers
   4. Front valance must have a downward plane, no blading of the nose
   5. Bodies must cover the entire chassis when looking downwards in an unforced position.

As this is a new class using new technology, rules are always subject to changes and tweaks. All parts will be marked and must be purchased from The Race Center.

Tech director has final say in all decisions made. No exceptions.