H&R Racing truck rules

H&R CH07 Chassis only

H&R 26,000 rpm motor part#HRMCI

Must run stock as comes except:

Minimum chassis height .047

Minimum front tire diameter .950

Minimum rear tire diameter .975

Loctite all screws recommended

May run any guide flag, guide spacers, guide nut, leadwire & clips

May run any 48 pitch gear ratio

Must run H&R wide and narrow width foam tire. H&R hard rear is also allowed.

Chassis wheel base may be adjusted per stock holes

Front and rear tire width must be 3 inches at all times before, during & after race

Body:

4.5" lexan truck body - must be commercially available

Body must be cut at the cut line

Must have roof and door numbers