WOmp Dirt late model rules

***Dirt Late Model Class***

Chassis:

MPP Strike II #MPP WOMP2 

Parma WOMP steel #572

K&G  Brute #16-02

Mid America Hammer #221

Parma WOMP brass #573

Riggen #5003

Mid-America Stomp #MAR202B

Champion Thumper #400

Riggen 7002

American Adrenaline Max Thrust #AA

Champion Thumper #401

R GEO Raven #RGO-335

Pro-Track Pro Brass WOMP # 672

LVJ Charger #002

R GEO Goblin #334

RP Performance Intimidator 1 #2394 

LVJ Charger brass #LVJ002B

R GEO Goblin SS #344 

JW Performance T Womp #006

H&R Stinger #HRST01

Bracing is permitted. Motor mount may be cut off. Motor must be mounted 90 degrees to the rear axle. Drilling, grinding, bending, cutting of the chassis is permitted. Chassis must remain as a “one piece” unit. No “flexi” style multi-piece modifications are permitted. Additional weight is permitted. LVJ Chassis must have the front screws assembled with Lock-Tite (or equivalent) and be tight to the chassis. Offset axle bushings are permitted. No ball bearings.

Width & Wheel Base:

Width: 3” centered with no offset of excessive slop. Width is to be measured by a standard ruler.

Wheel Base: Maximum of 3 1/8” center to center of the axles.

Clearance: .047 clearance measured from under the motors end bell back including the crown gear.

Motor:

H&R Hawk 1 motor #HRMH1

Motor must be mounted in line at 90 degrees to the rear axle.  Motor may be tack soldered in place.

Motors may not be opened by any method.  Tech officials will fail any car presented, showing evidence of motor disassembly or other tampering

Body:

Caveman Bodeez 32-0010-03-K  

Guide Flag:

Any flag that is commercially available. No shortening of the guide flag. Cutting excess above the nut is permitted.

Tires & Axles:

Front: 1/8” or 3/32” solid or hollow axle permitted. Protrack 3/4” diameter front tire. Independent front axle combinations permitted. No rounding, curving, coning or painting permitted. Tires may be narrowed to 3/8” minimum width. White letters must be legible on the outside of the tire.

Rear: 1/8” or 3/32”solid or hollow axle permitted. Any diameter  Protrack tire providing the required minimum clearance. White lettering must be legible on the outside of the tire.

Gears: 48 pitch only. Beveled gears are permitted.