Pro Bar sprint rules

Pro Bar Sprint Rules

Chassis
1. H&R HRCH01 or HRCH07 chassis ONLY
2. Pans used for body mounting may be cut off
3. Chassis must be assembled with only 1 hole showing from the bottom of the chassis.
4. Front axle may be in any of the 3 holes
5. Cages may not be any shorter than 2” with a maximum ⅛” tolerance All cages must be made of metal tubing or wire.
6. All bars must be secured to the chassis sufficiently
Body
1. All cars must have a Sprint car body
2. Must have a Tank and nose piece, as well as side panels.
3. Side panels and nose piece may be made custom
4. Tank must be either a Resin mold or out of a Model kit
5. Body must be sufficiently secured to the chassis
6. All cars must have a driver
Motor and Gears
1. H&R Cobra 26,000 RPM and H&R Hawk 18,000 RPM motors ONLY
2. Motors may not be opened or tampered with
3. Any combination of 48p pinion and crown gear allowed
4. No metal crown gears
5. Motors must be secured in place by two motor screws
Tires and Specifications
1. Any Pro-Track Daytona Stocker or H&R NASCAR style foam tire allowed
2. Front and rear tires may be used in any configuration
3. Maximum track width of 3 ⅛”
4. Offset is permitted
5. Must clear .047” at the rear
6. Must use solid ⅛” axle
7. Independent front wheels are allowed