Motor:
JK Mini Brute only
Motor must be stock as comes from manufacturer with no modifications
Motors must be held to motor bracket by at least one screw and may be soldered to motor bracket
Chassis:
Commercially available, no modifications
Bracing is allowed
Oilites only, no bearings
1/8 or 3/32 rear axles, no hollow axles
1/8 front axle only, no hollow axles
Maximum axle width 3.25 inches front and rear. Offset is allowed
3/4 inch minimum diameter front wheels with o-ring or foam tires required
No stickers
48 pitch plastic crown gears
No sidewinder motors, gears
Axle stiffeners and spacers are allowed
Interiors are optional
Minimum of .047 clearance from tech block to lowest point of rear of chassis and gear
No part of the chassis should touch the track
Additional weight is allowe
Tires:
No rear tire size restrictions as long as chassis and gear clearance is correct
Bodies:
Commercially available plastic 1/32 or womp bodies allowed
If body comes with a wing, wing will be allowed. No add ons.